MP2005

Active
800mA High PSRR, ULDO Linear Regulator


Learn about our Evaluation Kit
Talk to an Engineer or get a Quote
Upgrade to myMPS+

Product Description

The MP2005 is a micropower, ultra low-dropout LDO linear regulator. It has a 1.0V to 5.5V input voltage range and can regulate the output voltage from as low as 0.5V. The MP2005 can supply up to 800mA of load current with a typical dropout voltage of 90mV. It requires a bias supply (2.7V to 5.5V) separate from VIN to run the internal reference and LDO drive circuitry. The output current comes directly from the input voltage supply for high efficiency regulation. The 0.5V internal reference voltage allows the output to be programmed to a wide range of voltages (0.5V to 4V). A low bias current of 100? makes the MP2005 ideal for use in battery-powered applications. The bias supply VBIAS can be directly applied from the battery while VIN is powered from the high efficiency buck regulator (or other secondary supply). This reduces output noise and the size of the decoupling capacitor. Other features of MP2005 include thermal overload and current limit protection, stability with ultra low ESR ceramic capacitors as low as 1?, and fast transient response. The MP2005 is available in a 8-pin QFN (2mm x 3mm) package.

Product Features

  • Wide 1.0V to 5.5V Input Voltage Range
  • Stable with 1? Ceramic Capacitor
  • Ultra-Low Dropout (ULDO) voltage: 90mV@800mA
  • 2% Accurate Output Voltage
  • Adjustable Output Range of 0.5V to 4V
  • High PSRR ??? 65dB at 1KHz ??? 48dB at 1MHz
  • Better Than 0.0005%/mA Load Regulation
  • Stable With Low-ESR Output Capacitors
  • Low 100? Ground Current
  • Internal Thermal Protection
  • Current Limit Protection
  • 1? Typical Quiescent Current at Shutdown

Parametrics

  • Vdropout (mV)70 (IO:800mA)
  • Special FeaturesCurrent Limiting
  • GradeCatalog
  • Vout (min) (V)0.5
  • Vout (max) (V)4
  • PSRR @ 1kHz (dB)65
  • Iq (typ) (µA)104
  • Accuracy (±%)2
  • Iout (mA)800
  • Vin (max) (V)5.5
  • Vin (min) (V)1

Evaluation Kit

GET THIS KIT

Kit details

The EV20051DN-00A evaluation board demonstrates the performance of MP20051, a low noise and low dropout linear regulator. It operates from 2.5V to 5.5V input voltage and the output voltage can be set externally which ranges from 0.8V to 5V.

The EV20051DN-00A can supply up to 1A of load current, and features current limiting, over temperature protection.

An internal PMOS pass element is used to allow a low 110?A ground current, marking the MP20051 suitable for battery-power devices.

US$ 25.00 + tax